Product ID:CANON NX
MSDS Date:06/15/1993
FSC:6850
NIIN:00N054446
MSDS Number: BVYPL

ASPEN IMAGING INTERNATIONAL INC

555 ASPEN RIDGE DR
LAFAYETTE, CO 80026-9300
US

Emergency Phone: 303-666-5750;800-955-5555

Info Phone: 303-666-5750;800-955-5555

Cage: 65521

ASPEN IMAGING INTL INC

LAFAYETTE, CO 80027-5000 US

Telephone: 800-955-5555

Cage: 65521

STYRENE ACRYLATE COPOLYMER; (STYRENE/ACRYLIC COPOLYMER

CAS: 25153-46-2

OSHA PEL N/K

ACGIH TLV: N/K

IRON OXIDE

CAS: 1317-61-9

OSHA PEL 10 MG/M3

ACGIH TLV: 5 MG/M3

IRON (III) OXIDE; (IRON OXIDE)

CAS: 1309-37-1

RTECS: NO7400000

OSHA PEL 10 MG/M3 (FE)

ACGIH TLV: 5 MG/M3 FUME (FE)

PROPENE POLYMERS; (POLYOLEFIN)

CAS: 9003-07-4

RTECS: UD1842000

OSHA PEL N/K

ACGIH TLV: N/K

CARBON BLACK

CAS: 1333-86-4

RTECS: FF5800000

OSHA PEL 3.5 MG/M3

ACGIH TLV: 3.5 MG/M3

DYE; (METAL COMPLEX DYE)

CAS: 31714-55-3

OSHA PEL N/K

ACGIH TLV: N/K

AMORPHOUS SILICA

CAS: 112945-52-5

RTECS: VV7310000

OSHA PEL 6 MG/M3

ACGIH TLV: 10 MG/M3

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHAL: ACUTE: EXPOS UNDER NON-DUSTY
CNDTNS SHOULD NOT CAUSE ANY SIGNIFICANT HLTH EFT. UNDER DUSTY
CNDTNS, IRRIT MAY OCCUR WITH SOME ACCUMULATION OF TONER DUST IN
NOSE & THROAT. CHRONIC: RPTD EXPOS UND ER NON-DUSTY CNDTNS SHOULD
NOT CAUSE SIGNIFICANT HLTH HAZ. RPTD INHAL OF HIGH CONCS OF TONER
HAS CAUSED(EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:HLTH HAZS: LUNG EFTS & DMG IN LAB ANIMALS.
BASED ON THESE STUDIES, EXCESSIVELY DUSTY CNDTNS SHOULD BE AVOIDED.
SKIN: PROD SHOULD NOT BE SIGNIFICANT HAZ FROM DERMAL EXPOS. EYE:
TONER DUST MAY CAUSE CON JUNCT IRRIT BUT NO CHEM IRRIT/DMG TO
EYE/ITS PARTS. INGEST: ACCIDENTAL INGEST OF TONER MAY CAUSE NAUSEA.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:EYES: IMMEDIATELY FLUSH WITH LARGE AMOUNTS OF WATER FOR AT
LEAST 15 MINUTES, OCCASIONALLY LIFTING UPPER AND LOWER EYELIDS. IF
EYE IRRITATION DEVELOPS, SEEK MEDICAL ATTENTION. SKIN: WASH WITH
SOAP AND WATER TO REMOVE. INHALATION: REMOVE FROM EXPOSURE.
SUPPORT BREATHING (GIVE ARTIFICIAL RESPIRATION/OXYGEN) . INGESTION:
CALL MD IMMEDIATELY .

Extinguishing Media:WATER FOG, FOAM, DRY CHEMICAL, CARBON DIOXIDE.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT . COOL FIRE EXPOSED CONTAINERS WITH WATER
SPRAY.
Unusual Fire/Explosion Hazard:AS WITH ALL COMBUST MATLS IN FINELY
DIVDED STATE, EXTREMELY HIGH CONCENTRATIONS IN AIR MAY CREATE AN
EXPLOSIVE MIXTURE. ELIMINATE SOURCES OF IGNITION.

Spill Release Procedures:LOOSE TONER MAY BE VACUUMED OR SWEPT. RESIDUE
MAY BE REMOVED WITH SOAP AND WATER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:AVOID REPEATED OR PROLONGED
INHALATIONS OF EXCESSIVE DUST. DO NOT TAKE INTERNALLY. AVOID
CONTACT WITH SKIN, EYES, AND CLOTHING.
Other Precautions:STORE IN COOL, DRY, WELL-VENTILATED AREA. DO NOT
INCINERATE.

Respiratory Protection:WEAR NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE
FOR EXPOSURE OF CONCERN . NONE REQUIRED WHEN USED AS INTENDED IN
PRINTER EQUIPMENT.
Ventilation:GENERAL VENTILATION SUFFICIENT TO KEEP AIRBORNE
CONCENTRATION BELOW CURRENT EXPOSURE LIMITS .
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APPROVED CHEM WORKERS GOGG .
Other Protective Equipment:NONE REQD WHEN USED AS INTENDED IN PRINTER
EQUIP.FOR OTHER THAN NORM OFFICE USE(SUCH AS IN BULK TONER
PROCESSING(SUPDAT)
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
OTHER PROTECTIVE EQUIPMENT: FACILITY) WEAR APPROPRIATE PROTECTIVE GEAR.

HCC:N1
Spec Gravity:1.3-1.5
Solubility in Water:INSOLUBLE
Appearance and Odor:BLACK POWDER, FAINT ODOR.

Stability Indicator/Materials to Avoid:YES
NONE KNOWN.
Stability Condition to Avoid:ABNORMALLY HIGH AIRBORNE CONCS OF DUST CAN
PRESENT POSSIBILITY OF AN EXPLOSION IF AN IGNITION SOURCE IS
PRESENT.
Hazardous Decomposition Products:CARBON MONOXIDE AND CARBON DIOXIDE.

Waste Disposal Methods:REMOVE TO AN APPROVED LANDFILL SITE AND DISPOSE
OF IN ACCORDANCE WITH FEDERAL, STATE, AND LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.